De quoi parle t'il dans la release ?
1. The MFC-101 Mark III now allows you to move the preset switch range to anywhere on the board by designating the FirstPresetSwitch. All switches below the first preset switche will be Instant Access Switches. With this, you can move the 5 default preset switches to row 2 or row 3 and use the lower rows for instant access. So for example, to use footswitches 11-15 as presets set FirstPresetSwitch to 11 and Bank Size to 5. We unfortunately cannot fit this feature into original/Mk II firmware :-(
2. Expanded Axe-Fx Transmit Program Change Map (“AxeFx Tx Map”) to support preset numbers up to 768 on the Axe-Fx II XL. The TxMap allows you to map any MFC preset footswitch to any Axe-Fx II XL preset. (See the MFC-101 manual, section 12.4.3 Axe-Fx Preset Transmit Map for more on this feature.)
a. If the model is not XL, any previous map entry greater than 383 will appear as 383 and act as 383 (CC#0:2 and PC127).
b. When making changes to a pre-stored map entry greater than 383 while the model is not XL, it only takes one button press to go from 383 to OFF.
Please remember that the MFC shows its own internal preset numbers and not those of the Axe-
Fx II. So mapping MFC preset 000 to Axe-Fx Preset 383 (“Bypass”) will show “X000 Bypass” in the MFC-101 display.
IMPORTANT: When using TxMap for any Axe-Fx II, you must turn off “Total Sync” on the MFC-101. Press EDIT, Press MIDI (#4), Page Right (#7) two times, and set TotalSync to “OFF”. The MFC-101 will no longer automatically switch to presets selected from the Axe-Fx II Front Pan
Language:
